STEERING HEATER SWITCH INSPECTION

PROCEDURE


  1. INSPECT REFRESHING SEAT SWITCH


    1. A01X571E03
      Text in Illustration
      *a

      Component without harness connected

      (Steering Heater Switch)

      Disconnect the steering heater switch connector.

    2. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 (IG) - 8 (IN) Steering heater switch is pushed Below 1 Ω
      Steering heater switch is not pushed 10 kΩ or higher