MULTIPLEX TILT AND TELESCOPIC ECU INSTALLATION

PROCEDURE

1. Click here

   INSTALL MULTIPLEX TILT AND TELESCOPIC ECU

   
   

   1. Install the ECU with the 2 screws.

      1.5 N*m

      15 kgf*cm

      13 in.*lbf

   2. Connect the 2 connectors.

      Note:

      The connectors on both ends of the wire harness between the telescopic motor and ECU are the same shape. When installing them, connect the connectors of the same color.

2. Click here

   INSTALL STEERING LOCK ACTUATOR ASSEMBLY

   Click here

3. Click here

   INSTALL STEERING COLUMN ASSEMBLY (TILT STEERING GEAR ASSEMBLY WITH MOTOR)

   Tip:

   Refer to the instructions for installation of the steering column assembly (Click here).