STEERING WHEEL INSTALLATION

PROCEDURE


  1. INSTALL STEERING WHEEL BOSS LOWER COVER (w/o Steering Heater)


    1. for Type A:


      1. Attach the 4 claws and 2 screws and install the steering wheel boss lower cover.

    2. for Type B:


      1. Attach the 6 claws and install the steering wheel boss lower cover.

  2. INSTALL STEERING SHAKE DAMPER (w/ Steering Shake Damper)


    1. Install the 2 screws to steering shake damper.

  3. INSTALL NO. 1 STEERING WHEEL ORNAMENT (for Type B)


    1. Attach the 2 claws and 2 bolts, NO. 1 steering wheel ornament

  4. INSTALL NO. 2 STEERING WHEEL ORNAMENT (for Type B)

    Tech Tips

    Refer to "INSTALL NO. 1 STEERING WHEEL ORNAMENT".

  5. INSTALL STEERING PAD COVER LH (w/o Steering Pad Switch)


    1. Install the screw and 4 guide pins, install the steering pad cover LH.

  6. INSTALL STEERING PAD COVER RH (w/o Steering Pad Switch)


    1. Install the screw and 4 guide pins, install the steering pad cover RH.

  7. INSTALL STEERING PAD SWITCH ASSEMBLY (w/ Steering Pad Switch)


    1. Attach the 4 claws and 4 guide pins to install the steering pad switch assembly.

    2. Install the 4 screws.

  8. INSTALL STEERING PAD SWITCH LH

    Tech Tips

    Refer to "INSTALL STEERING PAD SWITCH ASSEMBLY".

  9. INSTALL CRUISE CONTROL MAIN SWITCH (w/ Cruise Control System)

    Click here

  10. ADJUST SPIRAL CABLE

    Click here

  11. INSTALL STEERING WHEEL ASSEMBLY


    1. for Type A:


      1. B001W5ME02
        Text in Illustration
        *a Matchmark

        Align the matchmarks on the steering wheel assembly and steering main shaft assembly.

    2. for Type B:


      1. B001ZNRE03
        Text in Illustration
        *a Matchmark

        Align the matchmarks on the steering wheel assembly and steering main shaft assembly.

    3. Install the steering wheel assembly set nut.

      Torque:
      50 N*m  { 510 kgf*cm, 37 ft.*lbf }

  12. INSTALL STEERING PAD

    Click here

  13. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  14. CHECK SRS WARNING LIGHT

    Click here

  15. PERFORM VARIABLE GEAR RATIO STEERING SYSTEM CALIBRATION (w/ VGRS)

    Click here