STEERING WHEEL INSTALLATION

PROCEDURE

1. INSTALL STEERING WHEEL BOSS LOWER COVER

   
   

   1. 

      Attach the 4 claws and 2 screws and install the steering wheel boss lower cover.

2. INSTALL STEERING SHAKE DAMPER

   
   

   1. 

      Install the 2 screws to steering shake damper.

3. INSTALL STEERING PAD COVER LH (w/o Steering Pad Switch)

   
   

   1. 

      Install the screw and 4 guide pins, install the steering pad cover LH.

4. INSTALL STEERING PAD COVER RH (w/o Steering Pad Switch)

   Tech Tips

   Use the same procedures described for the LH side.

5. INSTALL STEERING WHEEL HEATER CONTROL ASSEMBLY (w/ Steering Heater)

   Click here

6. ADJUST SPIRAL CABLE

   Click here

7. INSTALL STEERING WHEEL ASSEMBLY

   
   
   1. 

      Text in Illustration

      *a

      Matchmark

      Align the matchmarks on the steering wheel assembly and steering main shaft assembly.

   2. Install the steering wheel assembly set nut.

      Torque:

      50 N*m  { 510 kgf*cm, 37 ft.*lbf }

8. INSTALL CRUISE CONTROL MAIN SWITCH (w/ Cruise Control System)

   Click here

9. INSTALL STEERING PAD SWITCH ASSEMBLY (w/ Steering Pad Switch)

   
   

   1. 

      Attach the 4 claws to install the steering pad switch.

   2. Install the 2 screws.

   3. Connect the connector.

10. INSTALL STEERING PAD (w/ Airbag System)

    Click here

11. INSTALL STEERING PAD (w/o Airbag System)

    Tech Tips

    Refer to the step "INSTALL STEERING PAD (w/ Airbag System)".

12. INSTALL LOWER NO. 2 STEERING WHEEL COVER

    Click here

13. INSTALL LOWER NO. 3 STEERING WHEEL COVER

    Click here

14. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

15. CHECK SRS WARNING LIGHT

    
    

    1. Check the SRS warning light Click here.