STEERING COLUMN ASSEMBLY(for Power Tilt and Power Telescopic Steering Column) REASSEMBLY

PROCEDURE


  1. INSTALL MULTIPLEX TILT AND TELESCOPIC ECU

    A01X9E5

    1. Install the ECU with the 2 screws.

      Torque:
      1.5 N*m  { 15 kgf*cm, 13 in.*lbf }

    2. Connect the 2 connectors.

      Note

      The connectors on both ends of the wire harness between the telescopic motor and ECU are the same shape. When installing them, connect the connectors of the same color.

  2. INSTALL STEERING LOCK ACTUATOR ASSEMBLY

    A01XBJU

    1. Temporarily install the steering lock actuator assembly with 2 new tapered-head bolts.

    2. Tighten the 2 tapered-head bolts until the bolt heads break off.