POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM HOW TO PROCEED WITH TROUBLESHOOTING

DTC Code DTC Name
HOW TO PROCEED WITH TROUBLESHOOTING

CAUTION / NOTICE / HINT

Tech Tips


  • *: Use the GTS.

PROCEDURE


  1. VEHICLE BROUGHT TO WORKSHOP

    Result
    Proceed to
    NEXT

    NEXT

  2. CUSTOMER PROBLEM ANALYSIS


    1. Confirm the problem symptoms.

      Click here

      Result
      Proceed to
      NEXT

    NEXT

  3. INSPECT BATTERY VOLTAGE

    Standard voltage
    11 to 14 V

    If the voltage is below 11 V, recharge or replace the battery before proceeding.

    Result
    Proceed to
    NEXT

    NEXT

  4. CHECK CAN COMMUNICATION SYSTEM*


    1. Use the GTS to check if the CAN communication system is functioning normally.


      • CAN communication system (for LHD with central gateway ECU): Click here

      • CAN communication system (for LHD without central gateway ECU): Click here

      • CAN communication system (for RHD with central gateway ECU): Click here

      • CAN communication system (for RHD without central gateway ECU): Click here

      Result
      Result Proceed to
      CAN DTC is not output. A
      CAN DTC is output (for LHD with central gateway ECU). B
      CAN DTC is output (for LHD without central gateway ECU). C
      CAN DTC is output (for RHD with central gateway ECU). D
      CAN DTC is output (for RHD without central gateway ECU). E

    B

    GO TO CAN COMMUNICATION SYSTEM (for LHD with Central Gateway ECU) ( HOW TO PROCEED WITH TROUBLESHOOTING) Click here

    C

    GO TO CAN COMMUNICATION SYSTEM (for LHD without Central Gateway ECU) (HOW TO PROCEED WITH TROUBLESHOOTING) Click here

    D

    GO TO CAN COMMUNICATION SYSTEM (for RHD with Central Gateway ECU) (HOW TO PROCEED WITH TROUBLESHOOTING) Click here

    E

    GO TO CAN COMMUNICATION SYSTEM (for RHD without Central Gateway ECU) (HOW TO PROCEED WITH TROUBLESHOOTING) Click here

    A

  5. CHECK FOR DTCs*


    1. Check for DTCs.

      Click here

      Result
      Result Proceed to
      DTC is not output. A
      DTC is output. B

    B

    GO TO DIAGNOSTIC TROUBLE CODE CHART Click here

    A

  6. PROBLEM SYMPTOMS TABLE


    1. Refer to Problem Symptoms Table.

      Click here

      Result
      Result Proceed to
      Problem symptom does not occur. A
      Problem symptom occurs. B

    B

    GO TO STEP 8 Click here

    A

  7. OVERALL ANALYSIS AND TROUBLESHOOTING*

    Result
    Proceed to
    NEXT

    1. Data List / Active Test.

      Click here

    2. Terminals of ECU.

      Click here


    NEXT

  8. REPAIR OR REPLACE

    Result
    Proceed to
    NEXT

    NEXT

  9. CONFIRMATION TEST

    Result
    Proceed to
    NEXT

    NEXT

    END