FUNCTION OF MAIN COMPONENTS
| Component | Function |
|---|---|
| Multiplex tilt and telescopic ECU | This ECU sends a control signal to the tilt motor and telescopic motor, based on signals from each switch, to adjust the steering position. |
| Tilt motor (Built-in tilt position sensor) |
|
| Telescopic motor (Built-in telescopic position sensor) |
|
MANUAL OPERATION
The tilt and telescopic positions can be adjusted as desired by operating the tilt and telescopic switch.
AUTO AWAY/RETURN FUNCTION
When the power source is changed from on (ACC) or on (IG) to off, and the multiplex tilt and telescopic ECU receives a seat belt release signal, the steering wheel automatically tilts up and fully retracts.
When the power source is changed from off to on (ACC) or on (IG), or the multiplex tilt and telescopic ECU receives a seat belt fastened signal, the steering wheel automatically returns to the previous position which was set before the power source was turned off.
The auto away/return function can be prohibited by using the GTS.
DRIVING POSITION MEMORY FUNCTION (w/ Seat Memory)
The system can memorize and recall three driving positions by operating the seat memory switch.
Even if these positions are changed when the driver gets in or out of the vehicle, the system can restore the memorized position by the one-touch operation if the steering wheel column position and driver side seat position are stored.