VARIABLE GEAR RATIO STEERING SYSTEM DTC CHECK / CLEAR


  1. CHECK DTC (Using GTS)


    1. Connect the GTS to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Chassis / VGRS / Trouble Codes.

    5. Read the DTCs.

  2. CLEAR DTC (Using GTS)


    1. Connect the GTS to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Chassis / VGRS / Trouble Codes.

    5. Clear the DTCs.

    6. Turn the engine switch off.

  3. CHECK DTC (Using SST Check Wire)

    A01X0XQE40
    Text in Illustration
    *a Front view of DLC3

    Tech Tips

    The master warning light comes on in diagnostic mode.


    1. Using SST, connect terminals 13 (TC) and 4 (CG) of the DLC3.

      SST
      09843-18040

    2. Turn the engine switch on (IG).

    3. VGRS system starts searching for a malfunction.

    4. If the system is normal, "VGRS FF" is displayed.

    5. If the system has a malfunction, "VGRS XX" is displayed ("XX" is a 2-digit DTC).

  4. CLEAR DTC (Using SST Check Wire)

    A01X0XQE41
    Text in Illustration
    *a Front view of DLC3

    1. Turn the engine switch on (IG).

    2. Using SST, connect and disconnect terminals 13 (TC) and 4 (CG) of the DLC3 4 times within 8 seconds.

      SST
      09843-18040

    3. Turn the engine switch off.

      Tech Tips

      If a problem still exists, DTCs may not be cleared.