POWER STEERING ECU(for 1VD-FTV with DPF) INSTALLATION

PROCEDURE

1. INSTALL POWER STEERING ECU ASSEMBLY

   
   

   1. Connect the connector.

   2. Install the power steering ECU with the bolt.

      Torque:

      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

2. INSTALL INSTRUMENT PANEL SAFETY PAD ASSEMBLY

   Click here

3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

4. CHECK SRS WARNING LIGHT

   Click here