POWER STEERING ECU(for 1VD-FTV with DPF) REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. PRECAUTION

    Note

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE INSTRUMENT PANEL SAFETY PAD ASSEMBLY

    Click here

  4. REMOVE POWER STEERING ECU ASSEMBLY


    1. A01X42V

      Remove the bolt

    2. Disconnect the connector remove the power steering ECU.