VARIABLE GEAR RATIO STEERING SYSTEM INITIALIZATION


  1. STEERING SENSOR INITIALIZATION

    Tech Tips


    • If the cable is disconnected from the negative (-) battery terminal or the steering sensor connector is disconnected, the steering sensor zero point may be cleared.

    • Even when the steering sensor zero point calibration has not been performed, the master warning light does not illuminate.


    1. Start the engine.

    2. Slowly turn the steering wheel 360° clockwise and counterclockwise twice or three times.

    3. Drive the vehicle on a straight road at 40 km/h (25 mph) or more for 5 seconds or more.