PARKING BRAKE CABLE INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedures for the LH side and RH side.

  • The procedures listed below are for the LH side.

PROCEDURE


  1. INSTALL NO. 2 PARKING BRAKE CABLE ASSEMBLY


    1. Install the No. 2 parking brake cable clamp.

    2. Install the No. 2 parking brake cable with the 6 bolts.

      A01X2TRE07
      *1 No. 2 Parking Brake Cable Clamp
      Torque:
      13 N*m  { 127 kgf*cm, 9 ft.*lbf }

    3. Install the fuel tank Click here.

    4. A01XA9L

      Attach the claws of the No. 2 parking brake cable.

    5. A01X3AU

      Connect the No. 2 parking brake cable to the No. 1 parking brake pull rod.

  2. INSTALL NO. 3 PARKING BRAKE CABLE ASSEMBLY


    1. Install the No. 3 parking brake cable clamp.

    2. Install the No. 3 parking brake cable with the 6 bolts.

      A01XA89E04
      *1 No. 3 Parking Brake Cable Clamp
      Torque:
      13 N*m  { 127 kgf*cm, 9 ft.*lbf }
    3. A01X6XA

      Attach the claws of the No. 3 parking brake cable.

    4. A01X3AU

      Connect the No. 3 parking brake cable to the No. 1 parking brake pull rod.

  3. CONNECT NO. 3 PARKING BRAKE CABLE ASSEMBLY

    Click here

  4. INSTALL PARKING BRAKE SHOE LEVER LH

    Click here

  5. INSTALL NO. 2 PARKING BRAKE SHOE ASSEMBLY LH

    Click here

  6. INSTALL NO. 1 PARKING BRAKE SHOE ASSEMBLY LH

    Click here

  7. INSTALL PARKING BRAKE SHOE RETURN SPRING

    Click here

  8. CHECK PARKING BRAKE INSTALLATION

    Click here

  9. INSTALL REAR DISC

    Click here

  10. CONNECT REAR DISC BRAKE CYLINDER ASSEMBLY LH


    1. A01X644

      Connect the rear disc brake cylinder with 2 new bolts.

      Torque:
      95 N*m  { 969 kgf*cm, 70 ft.*lbf }

      Note


      • Do not twist the brake hose.

      • Make sure that the bolts are free from damage and foreign matter.

      • Do not overtighten the bolts.

  11. INSTALL REAR NO. 2 SUSPENSION CONTROL ACCUMULATOR BRACKET

    Click here

  12. INSTALL HEIGHT CONTROL UNIT PROTECTOR PIPE

    Click here

  13. ADJUST PARKING BRAKE

    Click here

  14. INSTALL REAR WHEEL

    Torque:
    for Aluminum Wheel
    131 N*m  { 1336 kgf*cm, 97 ft.*lbf }
    for Steel Wheel
    209 N*m  { 2131 kgf*cm, 154 ft.*lbf }

  15. INSTALL LOWER CONSOLE BOX (w/o Console Box Lid)

    Click here

  16. INSTALL COOLING BOX ASSEMBLY (w/ Cool Box)

    Click here

  17. INSTALL REAR CONSOLE BOX SUB-ASSEMBLY (w/o Cool Box)

    Click here