PARKING BRAKE LEVER INSTALLATION

PROCEDURE


  1. INSTALL PARKING BRAKE SWITCH ASSEMBLY


    1. Install the parking brake switch with the screw.

      Torque:
      0.9 N*m  { 9 kgf*cm, 8 in.*lbf }

  2. INSTALL PARKING BRAKE LEVER SUB-ASSEMBLY


    1. A01X5T9

      Install the parking brake lever with the 2 bolts.

      Torque:
      25 N*m  { 255 kgf*cm, 18 ft.*lbf }

    2. Install the parking brake lever support with the 2 bolts.

      Torque:
      25 N*m  { 255 kgf*cm, 18 ft.*lbf }

    3. Install the straight pin to the parking brake lever.

    4. A01X3AU

      Connect the No. 2 parking brake cable and No. 3 parking brake cable to the No. 1 parking brake pull rod.

    5. A01X7Q3

      Install the bush, compression spring and No. 1 parking brake pull rod to the parking brake lever with the adjusting nut.

    6. Install the parking brake return spring.

    7. Connect the parking brake switch connector.

  3. ADJUST PARKING BRAKE

    Click here

  4. INSTALL LOWER CONSOLE BOX (w/o Console Box Lid)

    Click here

  5. INSTALL COOLING BOX ASSEMBLY (w/ Cool Box)

    Click here

  6. INSTALL REAR CONSOLE BOX SUB-ASSEMBLY (w/o Cool Box)

    Click here