Click here

PARKING BRAKE SYSTEM ADJUSTMENT

Click here
Click here

PROCEDURE


  1. Click here

    INSPECT PARKING BRAKE LEVER TRAVEL


    1. Fully pull the parking brake lever to engage the parking brake.

    2. Release the lever to disengage the parking brake.

    3. Slowly pull the parking brake lever all the way, and count the number of clicks.

      Standard Parking Brake Lever Travel when Pulled with a Force of 200 N (20 kgf, 45 lbf)
      5 to 7 clicks

      If the parking brake lever travel is not as specified, adjust the parking brake shoe clearance and parking brake lever travel.

  2. Click here

    REMOVE REAR WHEEL

  3. Click here

    REMOVE UPPER CONSOLE COVER (w/o Console Box Lid)

    (Click here)

  4. Click here

    REMOVE CONSOLE CUP HOLDER BOX SUB-ASSEMBLY (w/ Cool Box)

    (Click here)

  5. Click here

    REMOVE CONSOLE CUP HOLDER BOX SUB-ASSEMBLY (w/o Cool Box)

    (Click here)

  6. Click here

    ADJUST PARKING BRAKE LEVER TRAVEL


    1. Completely release the parking brake lever.

    2. Loosen the adjusting nut to completely release the parking brake cable.

    3. A01X7Q3

      Temporarily install the hub nuts.

    4. Remove the hole plug.

    5. A01XBQXE05

      Insert an adjustment tool into the adjustment hole of the disc. Rotate the adjustment wheel in the "X" direction until the shoes are locked. Then rotate the adjustment wheel in the "Y" direction 8 notches.

    6. Check that the disc can be rotated lightly. If not, rotate the adjustment wheel in the "Y" direction and check again.

    7. Install the hole plug.

    8. Remove the hub nuts.

    9. A01X7Q3

      Turn the adjusting nut until the parking brake lever travel becomes correct.

      Standard Parking Brake Lever Travel when Pulled with a Force of 200 N (20 kgf, 45 lbf)
      5 to 7 clicks

    10. Operate the parking brake lever 3 to 4 times, and check the parking brake lever travel.

      Standard Parking Brake Lever Travel when Pulled with a Force of 200 N (20 kgf, 45 lbf)
      5 to 7 clicks

    11. Check whether the parking brake drags or not.

    12. When operating the parking brake lever, check that the brake warning light comes on.

      Standard Condition
      The brake warning light always illuminates at the first click.
  7. Click here

    INSTALL UPPER CONSOLE COVER (w/o Console Box Lid)

    (Click here)

  8. Click here

    INSTALL CONSOLE CUP HOLDER BOX SUB-ASSEMBLY (w/ Cool Box)

    (Click here)

  9. Click here

    INSTALL CONSOLE CUP HOLDER BOX SUB-ASSEMBLY (w/o Cool Box)

    (Click here)

  10. Click here

    INSTALL REAR WHEEL

    for Aluminum Wheel
    131 N*m 1336 kgf*cm 97 ft.*lbf
    for Steel Wheel
    209 N*m 2131 kgf*cm 154 ft.*lbf