FRONT BRAKE FLEXIBLE HOSE INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. INSTALL FRONT FLEXIBLE HOSE

   
   

   1. 

      *1	Fulcrum Length
      *2	Union Nut Wrench

      Install a new clip to the flexible hose.

   2. Using a union nut wrench, connect the flexible hose to the brake tube while holding the flexible hose with a wrench.

      Torque:

      without union nut wrench

      15 N*m  { 155 kgf*cm, 11 ft.*lbf }

      with union nut wrench

      14 N*m  { 145 kgf*cm, 10 ft.*lbf }

      Note

      
      

      • Do not bend or damage the brake tube.

      • Do not allow any foreign matter such as dirt and dust to enter the brake tube from the connecting point.

      • Use a torque wrench with a fulcrum length of 300 mm (11.8 in.).

      • The torque value for use with a union nut wrench is effective when the union nut wrench is parallel to the torque wrench.

   3. Install the bolt.

      Torque:

      31 N*m  { 316 kgf*cm, 23 ft.*lbf }

   4. 

      Install a new gasket and connect the flexible hose with the new union bolt.

      Torque:

      30 N*m  { 306 kgf*cm, 22 ft.*lbf }

2. BLEED BRAKE LINE

   Click here

3. INSTALL FRONT WHEEL

   Torque:

   for Aluminum Wheel

   131 N*m  { 1336 kgf*cm, 97 ft.*lbf }

   for Steel Wheel

   209 N*m  { 2131 kgf*cm, 154 ft.*lbf }