FRONT BRAKE INSTALLATION

PROCEDURE


  1. INSTALL FRONT DISC


    1. A01X5TQE01
      *1 Matchmark

      Align the matchmarks, and then install the front disc.

      Tech Tips

      When replacing the front disc with a new one, select the installation position where the front disc has the minimum runout.

  2. INSTALL DISC BRAKE CALIPER ASSEMBLY LH


    1. A01X1DF

      Install the disc brake caliper with 2 new bolts.

      T = 99 N*m{ 1,010 kgf*cm 73 ft.*lbf }

  3. CONNECT FRONT FLEXIBLE HOSE


    1. A01XB66

      Install a new gasket and connect the flexible hose with the new union bolt.

      Torque:
      30 N*m  { 306 kgf*cm, 22 ft.*lbf }

  4. INSTALL FRONT DISC BRAKE PAD


    1. A01X2UX

      Install the No. 1 anti-squeal shims to each pad.

    2. A01X2TA

      Install the 2 pads to the disc brake caliper.

    3. A01X9I7

      Install the front disc brake anti-rattle spring between the 2 pads.

      Note

      The anti-rattle spring can be reused if it has sufficient rebound; no deformation, cracks or wear; and has had all rust, dirt and foreign particles cleaned off.

    4. A01X21K

      Install the 2 hole pins.

    5. Install the pin hold clip.

      Note

      The pin hold clip can be reused if it has sufficient rebound; no deformation or wear; and has had all rust, dirt and foreign particles cleaned off.

  5. BLEED BRAKE LINE

    Click here

  6. INSTALL FRONT WHEEL

    Torque:
    for Aluminum Wheel
    131 N*m  { 1336 kgf*cm, 97 ft.*lbf }
    for Steel Wheel
    209 N*m  { 2131 kgf*cm, 154 ft.*lbf }