CRAWL SWITCH REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION

    Click here

  4. REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH

    Click here

  5. REMOVE NO. 1 INSTRUMENT PANEL FINISH PANEL CUSHION

    Click here

  6. REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH

    Click here

  7. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY

    Click here

  8. REMOVE LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

    Click here

  9. REMOVE REAR UPPER CONSOLE PANEL SUB-ASSEMBLY

    Click here

  10. REMOVE CONSOLE CUP HOLDER BOX SUB-ASSEMBLY

    Click here

  11. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY

    Click here

  12. REMOVE SUSPENSION CONTROL SWITCH (CRAWL SWITCH)


    1. Disconnect the 2 connectors.

    2. A01X6RR

      Detach the 4 claws and remove the suspension control switch (CRAWL switch) from the upper console panel.