STEERING ANGLE SENSOR INSTALLATION

PROCEDURE


  1. INSTALL STEERING ANGLE SENSOR


    1. A01X3ETE01
      *1 Pin

      Align the installation holes on the steering sensor with the pins on the spiral cable.

    2. Attach the 6 claws and install the steering sensor to the spiral cable.

  2. INSTALL SPIRAL CABLE SUB-ASSEMBLY

    Click here

  3. INSTALL UPPER STEERING COLUMN COVER

    Click here

  4. INSTALL LOWER STEERING COLUMN COVER

    Click here

  5. ADJUST SPIRAL CABLE

    Click here

  6. INSTALL STEERING WHEEL ASSEMBLY

    Click here

  7. INSTALL STEERING PAD

    Click here

  8. INSTALL LOWER NO. 2 STEERING WHEEL COVER

    Click here

  9. INSTALL LOWER NO. 3 STEERING WHEEL COVER

    Click here

  10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note


    • Reset the Autoaway/Return function setting to the previous condition by changing the customize parameter Click here.

    • When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  11. CHECK SRS WARNING LIGHT


    1. Check the SRS warning light Click here.