DECELERATION SENSOR(w/ ABS) REMOVAL

PROCEDURE

1. Click here

   PRECAUTION

   Note:

   After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).

2. Click here

   DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

   Note:

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

3. Click here

   REMOVE LOWER CONSOLE BOX (w/o Console Box Lid)

   (Click here)

4. Click here

   REMOVE COOLING BOX ASSEMBLY (w/ Cool Box)

   (Click here)

5. Click here

   REMOVE REAR CONSOLE BOX SUB-ASSEMBLY (w/o Cool Box)

   (Click here)

6. Click here

   REMOVE DECELERATION SENSOR (for Automatic Transmission)

   
   
   1. 

      Table 2.

      *1

      for RHD:

      

      Table 1.

      *1

      for LHD:

      Disconnect the sensor connector, and then detach the clamp from the sensor bracket.

   2. Remove the 2 bolts and sensor.

7. Click here

   REMOVE DECELERATION SENSOR (for Manual Transmission)

   
   

   1. Disconnect the sensor connector, and then detach the clamp from the sensor bracket.

   2. 

      Table 4.

      *1

      for RHD:

      

      Table 3.

      *1

      for LHD:

      Remove the 2 bolts and sensor.