TIRE PRESSURE WARNING RECEIVER REMOVAL

PROCEDURE

1. PRECAUTION

   Note

   After turning the engine switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notice before proceeding with work Click here.

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

3. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY RH

   
   

   • w/o Sliding Roof: Click here

   • w/ Sliding Roof: Click here

4. REMOVE TIRE PRESSURE WARNING ECU AND RECEIVER

   
   
   1. 

      Text in Illustration

      *a	Guide
      *b	Clamp

      Remove the bolt.

   2. Detach the guide and clamp to remove the tire pressure warning ECU and receiver.

   3. Disconnect the connector from the tire pressure warning ECU and receiver.