NETWORK GATEWAY ECU(for LHD) INSTALLATION

PROCEDURE


  1. INSTALL NETWORK GATEWAY ECU

    A01X0OF

    1. Install the ECU with the nut.

    2. Connect the connector.

  2. INSTALL LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL

    Click here

  3. INSTALL INSTRUMENT PANEL BOX DOOR KNOB

    Click here

  4. INSTALL NO. 3 INSTRUMENT CLUSTER FINISH PANEL GARNISH

    Click here

  5. INSTALL FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY (w/ Passenger Side Knee Airbag)

    Click here

  6. INSTALL LOWER INSTRUMENT PANEL (w/o Passenger Side Knee Airbag)

    Click here

  7. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Floor Under Cover)

    Click here

  8. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH


    1. w/o Console Box Lid:


      1. Install the lower instrument panel pad sub-assembly RH Click here.

    2. w/ Cool Box:


      1. Install the lower instrument panel pad sub-assembly RH Click here.

    3. w/o Cool Box:


      1. Install the lower instrument panel pad sub-assembly RH Click here.

  9. INSTALL NO. 1 INSTRUMENT PANEL FINISH PANEL CUSHION


    1. w/o Console Box Lid:


      1. Install the No. 1 instrument panel finish panel cushion Click here.

    2. w/ Cool Box:


      1. Install the No. 1 instrument panel finish panel cushion Click here.

    3. w/o Cool Box:


      1. Install the No. 1 instrument panel finish panel cushion Click here.

  10. INSTALL FRONT DOOR SCUFF PLATE RH


    1. w/ Sliding Roof:

      Install the front door scuff plate Click here.

    2. w/o Sliding Roof:

      Install the front door scuff plate Click here.

  11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (w/ Passenger Side Knee Airbag)

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  12. CHECK SRS WARNING LIGHT (w/ Passenger Side Knee Airbag)


    1. Check the SRS warning light Click here.