NETWORK GATEWAY ECU(for RHD) INSTALLATION

PROCEDURE


  1. INSTALL NETWORK GATEWAY ECU

    A01X383

    1. Install the ECU with the bolt.

    2. Connect the connector.

  2. INSTALL DRIVER SIDE KNEE AIRBAG ASSEMBLY (w/ Driver Side Knee Airbag)

    Click here

  3. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY (w/o Driver Side Knee Airbag)

    Click here

  4. INSTALL NO. 1 SWITCH HOLE BASE

    Click here

  5. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL

    Click here

  6. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Floor Under Cover)

    Click here

  7. INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH

    Click here

  8. INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH

    Click here

  9. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH


    1. w/o Console Box Lid:


      1. Install the lower instrument panel pad sub-assembly RH Click here.

    2. w/ Cool Box:


      1. Install the lower instrument panel pad sub-assembly RH Click here.

    3. w/o Cool Box:


      1. Install the lower instrument panel pad sub-assembly RH Click here.

  10. INSTALL NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION


    1. w/o Console Box Lid:


      1. Install the No. 2 instrument panel finish panel cushion Click here.

    2. w/ Cool Box:


      1. Install the No. 2 instrument panel finish panel cushion Click here.

    3. w/o Cool Box:


      1. Install the No. 2 instrument panel finish panel cushion Click here.

  11. INSTALL FRONT DOOR SCUFF PLATE RH


    1. w/ Sliding Roof:

      Install the front door scuff plate Click here.

    2. w/o Sliding Roof:

      Install the front door scuff plate Click here.

  12. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (w/ Driver Side Knee Airbag)

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  13. CHECK SRS WARNING LIGHT (w/ Driver Side Knee Airbag)


    1. Check the SRS warning light Click here.