MULTIPLEX NETWORK BODY ECU INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips

A bolt without a torque specification is shown in the standard bolt chart Click here.

PROCEDURE


  1. INSTALL NO. 2 MULTIPLEX NETWORK BODY ECU


    1. Install the No. 2 multiplex network body ECU with the bolt.

    2. Connect the 2 connectors.

  2. INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY RH

    Click here

  3. INSTALL REAR SEAT COVER CAP

    Click here

  4. INSTALL REAR DOOR SCUFF PLATE RH

    Click here

  5. INSTALL REAR STEP COVER

    Click here

  6. INSTALL REAR FLOOR MAT REAR SUPPORT PLATE

    Click here

  7. INSTALL REAR NO. 2 SEAT ASSEMBLY RH

    Click here