FRONT STABILIZER BAR(w/o KDSS) INSTALLATION

PROCEDURE


  1. INSTALL NO. 1 FRONT STABILIZER BAR BUSH


    1. A01XA3AE05
      *1 Outer Side
      *2 Bump
      *3 Front Side

      Install the 2 bushes to the outer side of the bush stoppers on the front stabilizer bar as shown in the illustration.

      Note

      Be sure to install the front No. 1 stabilizer bar bushes so that the cut and bump of each bush faces the under of the vehicle.

  2. INSTALL FRONT STABILIZER BAR


    1. A01X2OOE01
      *1 Front Side

      Set the stabilizer bracket so that the arrow mark is facing the front side of the vehicle.

    2. A01X7I4

      Temporarily install the 2 stabilizer brackets and front stabilizer bar with the 4 bolts.

  3. TEMPORARILY INSTALL FRONT STABILIZER LINK ASSEMBLY LH


    1. Temporarily install the stabilizer link with the nut and bolt.

    2. A01X7HLE05
      *1 Nut

      Tighten the nut.

      Torque:
      128 N*m  { 1305 kgf*cm, 94 ft.*lbf }

  4. TEMPORARILY INSTALL FRONT STABILIZER LINK ASSEMBLY RH


    1. A01X72UE05
      *1 Nut

      Temporarily install the stabilizer link with the nut and bolt.

    2. Tighten the nut.

      Torque:
      128 N*m  { 1305 kgf*cm, 94 ft.*lbf }

  5. TIGHTEN NO. 1 FRONT STABILIZER BRACKET LH


    1. A01X4QLE03

      Tighten the 2 bolts.

      Torque:
      87 N*m  { 887 kgf*cm, 64 ft.*lbf }

      Note

      Tighten the bolts in 3 steps, in the order shown in the illustration.

  6. TIGHTEN NO. 1 FRONT STABILIZER BRACKET RH


    1. A01WZAHE03

      Tighten the 2 bolts.

      Torque:
      87 N*m  { 887 kgf*cm, 64 ft.*lbf }

      Note

      Tighten the bolts in 3 steps, in the order shown in the illustration.

  7. INSTALL NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

    Click here

  8. INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH

    Click here

  9. INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH

    Click here

  10. STABILIZE SUSPENSION

    Click here

  11. TIGHTEN FRONT STABILIZER LINK ASSEMBLY LH


    1. A01X55FE03
      *1 Bolt

      Tighten the bolt.

      Torque:
      135 N*m  { 1376 kgf*cm, 100 ft.*lbf }

      Note

      Perform this procedure with all 4 wheels on the ground.

  12. TIGHTEN FRONT STABILIZER LINK ASSEMBLY RH


    1. A01X07HE01
      *1 Bolt

      Tighten the bolt.

      Torque:
      135 N*m  { 1376 kgf*cm, 100 ft.*lbf }

      Note

      Perform this procedure with all 4 wheels on the ground.