FRONT STABILIZER BAR(w/o KDSS) REMOVAL

PROCEDURE


  1. REMOVE FRONT WHEEL

  2. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH

    Click here

  3. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH

    Click here

  4. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

    Click here

  5. LOOSEN NO. 1 FRONT STABILIZER BRACKET LH


    1. A01X2KL

      Loosen the 2 bolts of the front stabilizer brackets.

  6. LOOSEN NO. 1 FRONT STABILIZER BRACKET RH


    1. A01X4RF

      Loosen the 2 bolts of the front stabilizer brackets.

  7. REMOVE FRONT STABILIZER LINK ASSEMBLY LH


    1. A01XADR

      Remove the bolt, nut and stabilizer link.

      Tech Tips

      If the ball joint turns together with the nut, use a 6 mm hexagon wrench to hold the stud.

  8. REMOVE FRONT STABILIZER LINK ASSEMBLY RH


    1. A01X7KD

      Remove the bolt, nut and stabilizer link.

      Tech Tips

      If the ball joint turns together with the nut, use a 6 mm hexagon wrench to hold the stud.

  9. REMOVE NO. 1 FRONT STABILIZER BRACKET LH


    1. A01X4QL

      Remove the 2 bolts and stabilizer bracket from the front frame assembly.

  10. REMOVE NO. 1 FRONT STABILIZER BRACKET RH


    1. A01WZAH

      Remove the 2 bolts and stabilizer bracket from the front frame assembly.

  11. REMOVE FRONT STABILIZER BAR


    1. Remove the front stabilizer bar from the frame assembly.

  12. REMOVE NO. 1 FRONT STABILIZER BAR BUSH


    1. Remove the front stabilizer bar bush from the front stabilizer bar.