FRONT STABILIZER BAR(w/ KDSS) REMOVAL

PROCEDURE

1. REMOVE STABILIZER CONTROL VALVE PROTECTOR

   Click here

2. OPEN STABILIZER CONTROL WITH ACCUMULATOR HOUSING SHUTTER VALVE

   Click here

3. REMOVE FRONT WHEEL

4. REMOVE TAILPIPE ASSEMBLY

   
   

   1. for 1GR-FE:

      Remove the tailpipe Click here.

   2. for 1UR-FE:

      Remove the tailpipe Click here.

   3. for 3UR-FE:

      Remove the tailpipe Click here.

   4. for 1VD-FTV (w/ DPF):

      Remove the tailpipe Click here.

   5. for 1VD-FTV (w/o DPF):

      Remove the tailpipe Click here.

5. REMOVE EXHAUST CENTER PIPE ASSEMBLY

   
   

   1. for 1GR-FE:

      Remove the center exhaust pipe Click here.

   2. for 1UR-FE:

      Remove the center exhaust pipe Click here.

   3. for 3UR-FE:

      Remove the center exhaust pipe Click here.

   4. for 1VD-FTV (w/ DPF):

      Remove the center exhaust pipe Click here.

   5. for 1VD-FTV (w/o DPF):

      Remove the center exhaust pipe Click here.

6. DISCHARGE SUSPENSION FLUID PRESSURE

   Click here

7. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH

   Click here

8. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH

   Click here

9. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

   Click here

10. REMOVE FRONT FENDER APRON TRIM PACKING B

    Click here

11. REMOVE FRONT FENDER APRON TRIM PACKING D

    Click here

12. REMOVE STABILIZER CONTROL TUBE PROTECTOR

    
    

    1. 

       Remove the 2 bolts and tube protector.

13. DISCONNECT FRONT NO. 1 STABILIZER CONTROL TUBE ASSEMBLY

    
    

    1. 

       Remove the 2 union bolts and 2 gaskets, and disconnect the stabilizer control tube.

14. LOOSEN FRONT NO. 1 STABILIZER BRACKET LH

    
    

    1. 

       Loosen the 2 bolts of the front stabilizer brackets.

15. LOOSEN FRONT NO. 1 STABILIZER BRACKET RH

    
    

    1. 

       Loosen the 2 bolts of the front stabilizer brackets.

16. REMOVE FRONT STABILIZER LINK ASSEMBLY LH

    
    

    1. 

       Remove the 2 bolts, nut and stabilizer link.

17. REMOVE FRONT STABILIZER LINK ASSEMBLY RH

    
    

    1. 

       Remove the bolt, nut and stabilizer link.

       Tech Tips

       If the ball joint turns together with the nut, use a 6 mm hexagon wrench to hold the stud.

18. REMOVE FRONT NO. 1 STABILIZER BRACKET LH

    
    

    1. 

       Remove the 2 bolts and stabilizer bracket from the front frame assembly.

19. REMOVE FRONT NO. 1 STABILIZER BRACKET RH

    
    

    1. 

       Remove the 2 bolts and stabilizer bracket from the front frame assembly.

20. DISCONNECT FRONT STABILIZER CONTROL CYLINDER

    
    

    1. 

       Remove the bolt, washer, nut, and stabilizer control cylinder from the frame assembly.

21. REMOVE FRONT STABILIZER BAR

    
    

    1. 

       Remove the bolt, nut and front stabilizer bar from the stabilizer control arm.

22. REMOVE FRONT NO. 1 STABILIZER BAR BUSH

    
    

    1. Remove the 2 stabilizer bar bushes from the front stabilizer bar.

23. REMOVE FRONT STABILIZER CONTROL ARM ASSEMBLY

    
    

    1. 

       Remove the bolt, nut and front stabilizer control arm from the front stabilizer control cylinder.

24. REMOVE FRONT NO. 1 SUSPENSION CONTROL BLEEDER PLUG

    
    

    1. 

       Remove the 2 front suspension control bleeder plugs from the front stabilizer control cylinder.