FRONT SHOCK ABSORBER DISASSEMBLY

PROCEDURE


  1. REMOVE FRONT SUPPORT TO FRONT SHOCK ABSORBER NUT

    A01XAOXE01

    1. Secure SST in a vise.

      SST
      09727-30021   ( 09727-00010, 09727-00021, 09727-00031 )
    2. A01X8O5E11
      Text in Illustration
      *a Correct
      *b Incorrect

      Attach the arm of SST to the diameter of the coil spring.

      CAUTION:


      • Make sure that the coil spring is installed so that the distance between the upper and lower hooks of SST is at the maximum.

      • Make sure that the claws of the hooks are securely attached.

    3. Using SST, compress the coil spring.

      CAUTION:


      • If the coil spring bends during the compression, immediately stop the compression and reinstall SST.

      • Do not compress the spring until the coil springs contact each other.

      • Do not use an impact wrench.

    4. A01X2E1

      Remove the front support to front shock absorber nut.

      CAUTION:

      Do not remove the front support to front shock absorber nut when the coil spring is not free.

  2. REMOVE FRONT SUSPENSION SUPPORT SUB-ASSEMBLY LH


    1. Remove the suspension support, 2 retainers and 2 cushions from the shock absorber rod.

  3. REMOVE FRONT COIL SPRING LH


    1. Remove the coil spring from the shock absorber.