FRONT ACCELERATION SENSOR REMOVAL

PROCEDURE


  1. TABLE OF BOLT, SCREW AND NUT

    Click here

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION

    Click here

  4. REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH

    Click here

  5. REMOVE NO. 1 INSTRUMENT PANEL FINISH PANEL CUSHION

    Click here

  6. REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH

    Click here

  7. REMOVE LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

    Click here

  8. REMOVE INSTRUMENT SIDE PANEL LH

    Click here

  9. REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH

    Click here

  10. REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH

    Click here

  11. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Floor Under Cover)

    Click here

  12. REMOVE FRONT DOOR SCUFF PLATE LH

    Click here

  13. REMOVE COWL SIDE TRIM BOARD LH

    Click here

  14. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL

    Click here

  15. REMOVE NO. 1 SWITCH HOLE BASE

    Click here

  16. REMOVE DRIVER SIDE KNEE AIRBAG ASSEMBLY (w/ Driver Side Knee Airbag)

    Click here

  17. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY (w/o Driver Side Knee Airbag)

    Click here

  18. REMOVE INSTRUMENT SIDE PANEL RH (w/o Airbag Cut Off Switch)

    Click here

  19. REMOVE INSTRUMENT SIDE PANEL RH (w/ Airbag Cut Off Switch)

    Click here

  20. REMOVE FRONT DOOR SCUFF PLATE RH

    Click here

  21. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Floor Under Cover)

    Click here

  22. REMOVE COWL SIDE TRIM BOARD RH

    Click here

  23. REMOVE FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY (w/ Passenger Side Knee Airbag)

    Click here

  24. REMOVE LOWER INSTRUMENT PANEL (w/o Passenger Side Knee Airbag)

    Click here

  25. REMOVE NO. 3 INSTRUMENT CLUSTER FINISH PANEL GARNISH

    Click here

  26. REMOVE INSTRUMENT PANEL BOX DOOR KNOB

    Click here

  27. REMOVE LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL

    Click here

  28. REMOVE STEERING CONTROL ECU WITH JUNCTION BLOCK (for LHD)


    1. A01X7D6E01
      *1 Rear Side:
      *2 Front Side:
      *3 Nut
      *4 Bolt

      Vehicle rear side:


      1. Disconnect the 7 connectors.

      2. Detach the 2 clamps.

      3. Remove the bolt and 2 nuts.

    2. Vehicle front side:


      1. Disconnect the 5 connectors.

    3. Remove the steering control ECU with junction block from the vehicle.

  29. REMOVE STEERING CONTROL ECU WITH JUNCTION BLOCK (for RHD)


    1. A01X1NRE01
      *1 View From Vehicle Rear:
      *2 View From Vehicle Front:

      Vehicle rear side:


      1. Disconnect the 2 connectors.

      2. Remove the bolt and 2 nuts.

    2. Vehicle front side:


      1. Disconnect the connector.

    3. Remove the steering control ECU with junction block from the vehicle.

  30. REMOVE ACCELERATION SENSOR (for Driver Side)


    1. A01X1KI

      Disconnect the connector.

    2. Remove the bolt and sensor.

      Tech Tips

      Use the same procedures for LHD and RHD vehicles.

  31. REMOVE ACCELERATION SENSOR (for Front Passenger Side)


    1. A01X5AM

      Disconnect the connector.

    2. Remove the bolt and sensor.

      Tech Tips

      Use the same procedures for LHD and RHD vehicles.