SUSPENSION CONTROL ECU REMOVAL

PROCEDURE

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

2. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY LH

   
   

   1. w/ Sliding Roof:

      Click here

   2. w/o Sliding Roof:

      Click here

3. REMOVE REAR SIDE NO. 2 AIR DUCT (w/ Heater)

   Click here

4. REMOVE SUSPENSION CONTROL ECU

   
   

   1. 

      Detach the wire harness clamp and disconnect the connector.

   2. Remove the 2 bolts and ECU.