HEIGHT CONTROL SENSOR(for Rear Side) REMOVAL

PROCEDURE


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  2. REMOVE REAR WHEEL

  3. REMOVE REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY LH


    1. B001VNI

      Disconnect the connector and 2 clamps.

    2. B001WYD

      Remove the 2 bolts, nut and sensor.

  4. REMOVE REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY RH


    1. B001XXD

      Disconnect the connector and 2 clamps.

    2. B001Y7T

      Remove the 2 bolts, nut and sensor.