Click here

HEIGHT CONTROL SENSOR(for Rear Side) REMOVAL

Click here
Click here

PROCEDURE


  1. Click here

    DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

  2. Click here

    REMOVE REAR WHEEL

  3. Click here

    REMOVE REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY LH


    1. B001VNI

      Disconnect the connector and 2 clamps.

    2. B001WYD

      Remove the 2 bolts, nut and sensor.

  4. Click here

    REMOVE REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY RH


    1. B001XXD

      Disconnect the connector and 2 clamps.

    2. B001Y7T

      Remove the 2 bolts, nut and sensor.