HEIGHT CONTROL SENSOR(for Front Side) REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedures for the RH side and LH side.

  • The procedures listed below are for the LH side.

PROCEDURE


  1. CLEAN CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  2. REMOVE FRONT WHEEL

  3. REMOVE FRONT FENDER APRON TRIM PACKING B

    Click here

  4. REMOVE FRONT HEIGHT CONTROL SENSOR SUB-ASSEMBLY LH


    1. B001VY0

      Disconnect the connector.

    2. Remove the nut, bolt and sensor.