DAMPING FORCE CONTROL ACTUATOR(for Front Side) DISPOSAL

PROCEDURE


  1. DISPOSE OF FRONT NO. 1 SUSPENSION CONTROL ACCUMULATOR ASSEMBLY LH

    A01X2L9E01
    *1 30 mm (1.18 in.)
    *2 20 mm (0.787 in.)

    1. Place the accumulator in a vise and saw a hole between A and B shown in the illustration using a saw to discharge the gas inside.

      CAUTION:


      • The gas is colorless, odorless and harmless.

      • Saw a hole while covering the saw with a cloth because chips may fly up.

  2. DISPOSE OF FRONT NO. 2 SUSPENSION CONTROL ACCUMULATOR

    A01XA7BE03
    *1 60 mm (2.36 in.)
    *2 25 mm (0.984 in.)

    1. Place the accumulator in a vise and saw a hole between A and B shown in the illustration using a saw to discharge the gas inside.

      CAUTION:


      • The gas is colorless, odorless and harmless.

      • Saw a hole while covering the saw with a cloth because chips may fly up.

  3. DISPOSE OF FRONT NO. 3 SUSPENSION CONTROL ACCUMULATOR

    A01X4JEE02
    *1 Hatched Area

    1. Place the gas camber in a vise and saw a hole in the hatched area shown in the illustration using a saw to discharge the gas inside.

      CAUTION:


      • The gas is colorless, odorless and harmless.

      • Saw a hole while covering the saw with a cloth because chips may fly up.