STABILIZER CONTROL VALVE(w/ KDSS) DISPOSAL

PROCEDURE


  1. DISPOSE OF STABILIZER CONTROL ACCUMULATOR

    A01X2SCE01
    *1 25 mm (0.984 in.)
    *2 50 mm (1.97 in.)
    *3 15 mm (0.5906 in.)

    1. Using a drill, make a hole in the area between A and B of the accumulator housing indicated in the illustration to discharge the inside gas and oil.

      CAUTION:

      Be careful when drilling because shards of metal may fly about, so always use the proper safety equipment.

      Note

      The gas is colorless, odorless and nonpoisonous.