SUSPENSION CONTROL CYLINDER INSTALLATION

Click here

PROCEDURE

1. Click here

   INSTALL CENTER SUSPENSION CONTROL CYLINDER SUB-ASSEMBLY

   
   

   1. Install the cylinder to the bracket with the 2 nuts.

      31 N*m

      316 kgf*cm

      23 ft.*lbf

2. Click here

   INSTALL HEIGHT CONTROL BRACKET WITH CYLINDER ASSEMBLY

   
   

   1. Install the bracket with cylinder with the 2 bolts.

      31 N*m

      316 kgf*cm

      23 ft.*lbf

3. Click here

   CONNECT NO. 3 HEIGHT CONTROL TUBE LH

   
   

   1. Install a new gasket to the No. 3 height control tube, and then connect the height control tube to the control cylinder with the union bolt.

      50 N*m

      510 kgf*cm

      37 ft.*lbf

4. Click here

   CONNECT NO. 4 HEIGHT CONTROL TUBE

   
   

   1. Install a new gasket to the No. 4 height control tube, and then connect the height control tube to the control cylinder with the union bolt.

      50 N*m

      510 kgf*cm

      37 ft.*lbf

5. Click here

   CONNECT NO. 4 HEIGHT CONTROL TUBE LH

   
   

   1. Install a new gasket to the No. 4 height control tube, and then connect the height control tube to the control cylinder with the union bolt.

      50 N*m

      510 kgf*cm

      37 ft.*lbf

6. Click here

   CONNECT NO. 3 HEIGHT CONTROL TUBE

   
   

   1. Install a new gasket to the No. 3 height control tube, and then connect the height control tube to the control cylinder with the union bolt.

      50 N*m

      510 kgf*cm

      37 ft.*lbf

7. Click here

   INSTALL NO. 1 HEIGHT CONTROL VALVE ASSEMBLY

   Click here

8. Click here

   CONNECT REAR NO. 4 HEIGHT CONTROL TUBE

   Click here

9. Click here

   INSTALL NO. 5 HEIGHT CONTROL TUBE

   Click here

10. Click here

    INSTALL NO. 5 HEIGHT CONTROL TUBE LH

    Click here

11. Click here

    INSTALL NO. 6 HEIGHT CONTROL TUBE LH

    Click here

12. Click here

    INSTALL NO. 6 HEIGHT CONTROL TUBE

    Click here

13. Click here

    INSTALL CLAMP

    Click here

14. Click here

    INSTALL SUSPENSION CONTROL PUMP ACCUMULATOR ASSEMBLY

    Click here

15. Click here

    INSTALL NO. 7 HEIGHT CONTROL TUBE

    Click here

16. Click here

    BLEED AIR FROM SUSPENSION FLUID

    Click here

17. Click here

    CHECK FLUID LEVEL IN RESERVOIR

    Click here

18. Click here

    INSPECT FOR SUSPENSION FLUID LEAK

    Click here

19. Click here

    INSTALL HEIGHT CONTROL UNIT INSULATOR

    Click here

20. Click here

    INSTALL CENTER EXHAUST PIPE ASSEMBLY

    
    

    1. for 1GR-FE:

       Install the center exhaust pipe (Click here).

    2. for 1UR-FE:

       Install the center exhaust pipe (Click here).

    3. for 3UR-FE:

       Install the center exhaust pipe (Click here).

    4. for 1VD-FTV:

       Install the center exhaust pipe (Click here).

21. Click here

    INSTALL TAILPIPE ASSEMBLY

    
    

    1. for 1GR-FE:

       Install the tailpipe (Click here).

    2. for 1UR-FE:

       Install the tailpipe (Click here).

    3. for 3UR-FE:

       Install the tailpipe (Click here).

    4. for 1VD-FTV:

       Install the tailpipe (Click here).

22. Click here

    INSPECT FOR EXHAUST GAS LEAK

    
    

    • If gas is leaking, tighten the areas necessary to stop the leak. Replace damaged parts as necessary.