SUSPENSION CONTROL CYLINDER REMOVAL

PROCEDURE


  1. REMOVE TAILPIPE ASSEMBLY


    1. for 1GR-FE:

      Remove the tailpipe Click here.

    2. for 1UR-FE:

      Remove the tailpipe Click here.

    3. for 3UR-FE:

      Remove the tailpipe Click here.

    4. for 1VD-FTV:

      Remove the tailpipe Click here.

  2. REMOVE CENTER EXHAUST PIPE ASSEMBLY


    1. for 1GR-FE:

      Remove the center exhaust pipe Click here.

    2. for 1UR-FE:

      Remove the center exhaust pipe Click here.

    3. for 3UR-FE:

      Remove the center exhaust pipe Click here.

    4. for 1VD-FTV:

      Remove the center exhaust pipe Click here.

  3. REMOVE HEIGHT CONTROL UNIT INSULATOR

    Click here

  4. DISCHARGE SUSPENSION FLUID PRESSURE

    Click here

  5. REMOVE NO. 7 HEIGHT CONTROL TUBE

    Click here

  6. REMOVE SUSPENSION CONTROL PUMP ACCUMULATOR ASSEMBLY

    Click here

  7. REMOVE CLAMP

    Click here

  8. REMOVE NO. 6 HEIGHT CONTROL TUBE

    Click here

  9. REMOVE NO. 6 HEIGHT CONTROL TUBE LH

    Click here

  10. REMOVE NO. 5 HEIGHT CONTROL TUBE LH

    Click here

  11. REMOVE NO. 5 HEIGHT CONTROL TUBE

    Click here

  12. DISCONNECT REAR NO. 4 HEIGHT CONTROL TUBE

    Click here

  13. REMOVE NO. 1 HEIGHT CONTROL VALVE ASSEMBLY

    Click here

  14. DISCONNECT NO. 3 HEIGHT CONTROL TUBE

    A01XAZR

    1. Remove the union bolt and gasket, then disconnect the No. 3 height control tube from the control cylinder.

  15. DISCONNECT NO. 4 HEIGHT CONTROL TUBE LH

    A01XAP8

    1. Remove the union bolt and gasket, then disconnect the No. 4 height control tube from the control cylinder.

  16. DISCONNECT NO. 4 HEIGHT CONTROL TUBE

    A01X7RX

    1. Remove the union bolt and gasket, then disconnect the No. 4 height control tube from the control cylinder.

  17. DISCONNECT NO. 3 HEIGHT CONTROL TUBE LH

    A01X6SN

    1. Remove the union bolt and gasket, then disconnect the No. 3 height control tube from the control cylinder.

  18. REMOVE HEIGHT CONTROL BRACKET WITH CYLINDER ASSEMBLY

    A01X2LQ

    1. Remove the 2 bolts and bracket with cylinder.

  19. REMOVE CENTER SUSPENSION CONTROL CYLINDER SUB-ASSEMBLY

    A01X367

    1. Remove the 2 nuts and cylinder from the bracket.