HEIGHT CONTROL ACCUMULATOR REMOVAL

PROCEDURE


  1. REMOVE TAILPIPE ASSEMBLY


    1. for 1GR-FE:

      Remove the tailpipe Click here.

    2. for 1UR-FE:

      Remove the tailpipe Click here.

    3. for 3UR-FE:

      Remove the tailpipe Click here.

    4. for 1VD-FTV:

      Remove the tailpipe Click here.

  2. REMOVE CENTER EXHAUST PIPE ASSEMBLY


    1. for 1GR-FE:

      Remove the center exhaust pipe Click here.

    2. for 1UR-FE:

      Remove the center exhaust pipe Click here.

    3. for 3UR-FE:

      Remove the center exhaust pipe Click here.

    4. for 1VD-FTV:

      Remove the center exhaust pipe Click here.

  3. REMOVE HEIGHT CONTROL UNIT INSULATOR

    Click here

  4. DISCHARGE SUSPENSION FLUID PRESSURE

    Click here

  5. REMOVE NO. 7 HEIGHT CONTROL TUBE

    A01X1KJ

    1. Using a union nut wrench, remove the control tube from the control valve and pump accumulator.

  6. REMOVE SUSPENSION CONTROL PUMP ACCUMULATOR ASSEMBLY

    A01X8AB

    1. Remove the 3 nuts and pump accumulator.