CONTROL VALVE ASSEMBLY REMOVAL

PROCEDURE


  1. REMOVE TAILPIPE ASSEMBLY


    1. for 1GR-FE:

      Remove the tailpipe Click here.

    2. for 1UR-FE:

      Remove the tailpipe Click here.

    3. for 3UR-FE:

      Remove the tailpipe Click here.

    4. for 1VD-FTV:

      Remove the tailpipe Click here.

  2. REMOVE CENTER EXHAUST PIPE ASSEMBLY


    1. for 1GR-FE:

      Remove the center exhaust pipe for Click here.

    2. for 1UR-FE:

      Remove the center exhaust pipe for Click here.

    3. for 3UR-FE:

      Remove the center exhaust pipe for Click here.

    4. for 1VD-FTV:

      Remove the center exhaust pipe for Click here.

  3. REMOVE HEIGHT CONTROL UNIT INSULATOR

    A01XA8N

    1. Remove the 3 bolts and insulator from the control unit.

  4. REMOVE CLAMP


    1. Remove the clamp from the 3 height control tubes.

  5. DISCHARGE SUSPENSION FLUID PRESSURE

    Click here

  6. REMOVE NO. 7 HEIGHT CONTROL TUBE

    Click here

  7. DISCONNECT REAR NO. 4 HEIGHT CONTROL TUBE


    1. A01X95SE04
      *1 Rear No. 4 Height Control Tube
      *2 Height Control Valve Connector

      Disconnect the connector.

    2. Remove the union bolt and gasket, then disconnect the rear No. 4 height control tube from the control valve.

  8. REMOVE NO. 5 HEIGHT CONTROL TUBE


    1. Using a union nut wrench, remove the No. 5 height control tube from the control valve and center cylinder.

      A01X7MQE03
      *1 No. 5 Height Control Tube

  9. REMOVE NO. 5 HEIGHT CONTROL TUBE LH

    A01XBQVE03
    *1 No. 5 Height Control Tube LH

    1. Using a union nut wrench, remove the No. 5 height control tube LH from the control valve and center cylinder.

  10. REMOVE NO. 6 HEIGHT CONTROL TUBE

    A01XB31E03
    *1 No. 6 Height Control Tube

    1. Using a union nut wrench, remove the No. 6 height control tube from the control valve and center cylinder.

  11. REMOVE NO. 6 HEIGHT CONTROL TUBE LH


    1. Using a union nut wrench, remove the No. 6 height control tube LH from the control valve and center cylinder.

      A01X3CLE03
      *1 No. 6 Height Control Tube LH

  12. REMOVE NO. 1 HEIGHT CONTROL VALVE ASSEMBLY

    A01X4R0

    1. Remove the 3 nuts and control valve.

    2. Remove the 3 bolt holders and 3 bolt cushions from the control valve.