REAR DIFFERENTIAL LOCK CONTROL SWITCH(w/ Differential Lock) INSPECTION

PROCEDURE


  1. INSPECT DIFFERENTIAL LOCK SWITCH


    1. A01X8L3E01
      *1 Component without harness connected: (Differential Lock Switch)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      1 (IG) - 4 (R) OFF 10 kΩ or higher
      RR Below 1 Ω

      If the result is not as specified, replace the switch.