REAR DIFFERENTIAL CARRIER ASSEMBLY(for Standard) REMOVAL

PROCEDURE


  1. DRAIN DIFFERENTIAL OIL

    Click here

  2. REMOVE REAR AXLE SHAFT


    1. Remove the axle shaft Click here.

  3. DISCONNECT REAR PROPELLER SHAFT ASSEMBLY


    1. A01X670E07
      *1 Matchmark

      Place matchmarks on the rear propeller shaft and companion flange.

    2. Remove the 4 nuts, 4 washers and 4 bolts, and disconnect the propeller shaft from the differential side.

    3. Support the propeller shaft securely.

  4. REMOVE REAR DIFFERENTIAL CARRIER SUB-ASSEMBLY


    1. A01XBCN

      Remove the 10 nuts, 10 washers and differential carrier.

      Note

      Be careful not to damage the contact surfaces of the differential carrier and rear axle housing.

    2. Remove the gasket.