REAR AXLE HUB BOLT REPLACEMENT

CAUTION / NOTICE / HINT

PROCEDURE

1. REMOVE STABILIZER CONTROL VALVE PROTECTOR (w/ KDSS)

   Click here

2. OPEN STABILIZER CONTROL WITH ACCUMULATOR HOUSING SHUTTER VALVE (w/ KDSS)

   Click here

3. REMOVE REAR WHEEL LH

4. DISCONNECT REAR DISC BRAKE CYLINDER ASSEMBLY LH

   Click here

5. REMOVE REAR DISC LH

   Click here

6. REMOVE PARKING BRAKE SHOE RETURN TENSION SPRING LH

   Click here

7. REMOVE NO. 1 PARKING BRAKE SHOE ASSEMBLY LH

   Click here

8. REMOVE NO. 2 PARKING BRAKE SHOE ASSEMBLY LH

   Click here

9. REMOVE PARKING BRAKE SHOE LEVER SUB-ASSEMBLY LH

   Click here

10. REMOVE REAR AXLE HUB BOLT LH

    
    
    1. 

       *1	Turn
       *2	Hold

       Using SST and a screwdriver or equivalent to hold the axle hub, remove the hub bolt.

       SST

       09650-17011

       Note

       
       

       • Do not deform the oil deflector.

       • Make sure to align the notch of SST with the flange of the oil deflector.

11. INSTALL REAR AXLE HUB BOLT LH

    
    
    1. 

       *1	Washer
       *2	Turn
       *3	Nut
       *4	Hold

       Temporarily install a washer and hub nut to a new hub bolt as shown in the illustration.

       Note

       Install a hub nut to prevent damage to the hub bolt.

    2. Using a screwdriver or equivalent to hold the hub, turn the hub nut until the bottom surface of the hub bolt head touches the axle hub.

    3. Remove the washer and hub nut.

       Note

       Do not damage the threads of the hub bolt.

12. INSTALL PARKING BRAKE SHOE LEVER SUB-ASSEMBLY LH

    Click here

13. INSTALL NO. 2 PARKING BRAKE SHOE ASSEMBLY LH

    Click here

14. INSTALL NO. 1 PARKING BRAKE SHOE ASSEMBLY LH

    Click here

15. INSTALL PARKING BRAKE SHOE RETURN TENSION SPRING LH

    Click here

16. CHECK PARKING BRAKE INSTALLATION

    Click here

17. INSTALL REAR DISC LH

    Click here

18. ADJUST PARKING BRAKE SHOE CLEARANCE

    Click here

19. CONNECT REAR DISC BRAKE CYLINDER ASSEMBLY LH

    Click here

20. INSTALL REAR WHEEL LH

    Torque:

    for Aluminum Wheel

    131 N*m  { 1336 kgf*cm, 97 ft.*lbf }

    for Steel Wheel

    209 N*m  { 2131 kgf*cm, 154 ft.*lbf }

21. CHECK PARKING BRAKE LEVER TRAVEL

    Click here

22. ADJUST PARKING BRAKE LEVER TRAVEL

    Click here

23. MEASURE VEHICLE HEIGHT (w/ KDSS)

    Click here

24. CLOSE STABILIZER CONTROL WITH ACCUMULATOR HOUSING SHUTTER VALVE (w/ KDSS)

    Click here

25. INSTALL STABILIZER CONTROL VALVE PROTECTOR (w/ KDSS)

    Click here