PROPELLER SHAFT ASSEMBLY INSTALLATION

PROCEDURE


  1. INSTALL REAR PROPELLER SHAFT


    1. A01X0B5E04
      *1 Matchmark

      Align the matchmarks on the propeller shaft flange and transfer.

    2. Connect the propeller shaft with the 4 washers and 4 nuts.

      Torque:
      88 N*m  { 900 kgf*cm, 65 ft.*lbf }
    3. A01X682E09
      *1 Matchmark
      *2 Bolt
      *3 Washer

      Align the matchmarks on the propeller shaft flange and rear differential.

    4. Install the propeller shaft with the 4 bolts, 4 washers and 4 nuts.

      Torque:
      88 N*m  { 900 kgf*cm, 65 ft.*lbf }

  2. INSTALL TRANSFER HEAT INSULATOR


    1. A01X5HD

      Install the insulator with the 4 bolts.

      Torque:
      30 N*m  { 306 kgf*cm, 22 ft.*lbf }