FRONT PROPELLER SHAFT ASSEMBLY INSTALLATION

PROCEDURE


  1. INSTALL FRONT PROPELLER SHAFT ASSEMBLY

    Note

    Refer to the components illustration for the installation direction of the propeller shaft.


    1. A01X879E01
      *1 Matchmark

      Align the matchmarks on the propeller shaft flange and differential.

    2. Connect the propeller shaft with the 4 washers and 4 nuts.

      Torque:
      88 N*m  { 900 kgf*cm, 65 ft.*lbf }
    3. A01X5SZE07
      *1 Matchmark

      Align the matchmarks on the propeller shaft flange and transfer flange.

    4. Install the propeller shaft with the 4 washers and 4 nuts.

      Torque:
      88 N*m  { 900 kgf*cm, 65 ft.*lbf }

  2. INSTALL PROPELLER SHAFT HEAT INSULATOR (w/ Heat Insulator)


    1. A01XAEG

      Install the insulator with the 2 bolts.

      Torque:
      16 N*m  { 160 kgf*cm, 12 ft.*lbf }

  3. INSTALL NO. 2 ENGINE UNDER COVER

    Click here

  4. INSTALL NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

    Click here

  5. INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH

    Click here

  6. INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH

    Click here