FRONT AXLE HUB REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedures for the LH side and RH side.

  • The procedures listed below are for the LH side.

PROCEDURE


  1. REMOVE STABILIZER CONTROL VALVE PROTECTOR (w/ KDSS)

    Click here

  2. OPEN STABILIZER CONTROL WITH ACCUMULATOR HOUSING SHUTTER VALVE (w/ KDSS)

    Click here

  3. REMOVE FRONT WHEEL

  4. DISCONNECT FRONT DISC BRAKE CALIPER ASSEMBLY LH


    1. A01X42P

      Remove the bolt and nut, and disconnect the brake tube bracket from the steering knuckle.

    2. A01X6X5

      Remove the 2 bolts and disconnect the disc brake caliper from the steering knuckle.

      Note


      • Do not disconnect the flexible hose from the disc brake caliper.

      • Do not twist or bend the flexible hose.

  5. REMOVE FRONT DISC

  6. REMOVE FRONT AXLE HUB GREASE CAP LH


    1. A01X0BY

      Using a screwdriver and hammer, remove the axle hub grease cap.

      Note

      Do not damage the axle hub.

  7. REMOVE FRONT AXLE SHAFT NUT LH


    1. A01X8AX

      Remove the cotter pin and adjusting lock cap.

    2. A01X317

      Using a 39 mm socket wrench, remove the axle hub nut.

  8. REMOVE FRONT AXLE HUB SUB-ASSEMBLY LH


    1. A01XAK4

      Remove the 4 bolts.

    2. A01WZZ0E01

      Using SST, remove the front axle hub together with the dust cover.

      SST
      09950-40011   ( 09951-04020, 09952-04010, 09953-04020, 09954-04010, 09955-04061, 09957-04010, 09958-04011 )

    3. Remove the O-ring.