CENTER DIFFERENTIAL LOCK SWITCH(w/o Entry and Start System) INSPECTION

PROCEDURE


  1. INSPECT CENTER DIFFERENTIAL LOCK SWITCH


    1. B001Y5IC02
      *a

      Component without harness connected

      (Center Differential Lock Switch)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      1 (E) - 4 (CPU) Center differential lock switch being pushed Below 1 Ω
      Center differential lock switch not pushed 10 kΩ or higher

      If the result is not as specified, replace the center differential lock switch.