TRANSFER CASE REAR OIL SEAL REPLACEMENT

PROCEDURE


  1. REMOVE PROPELLER SHAFT ASSEMBLY

    Click here

  2. REMOVE REAR OUTPUT SHAFT COMPANION FLANGE SUB-ASSEMBLY

    Click here

  3. REMOVE TRANSFER CASE REAR OIL SEAL


    1. A01X8K9E01

      Using SST, tap out the oil seal.

      SST
      09308-00010

      Note

      Be careful not to damage the oil seal and rear transfer case contact surface.

  4. INSTALL TRANSFER CASE REAR OIL SEAL


    1. Apply transfer oil to the spline of the output shaft.

    2. A01XBC8E01

      Using SST and a hammer, tap in a new oil seal until its surface is flush with the housing upper surface.

      SST
      09649-17010
      09950-70010   ( 09951-07150 )

  5. INSTALL REAR OUTPUT SHAFT COMPANION FLANGE SUB-ASSEMBLY

    Click here

  6. INSTALL PROPELLER SHAFT ASSEMBLY

    Click here