TRANSFER CASE FRONT OIL SEAL REPLACEMENT

PROCEDURE


  1. DRAIN TRANSFER OIL

    Click here

  2. REMOVE FRONT PROPELLER SHAFT ASSEMBLY

    Click here

  3. REMOVE FRONT OUTPUT SHAFT COMPANION FLANGE SUB-ASSEMBLY

    Click here

  4. REMOVE FRONT TRANSFER CASE OIL SEAL


    1. A01X69NE01

      Using SST, remove the front transfer case oil seal.

      SST
      09308-10010
      09950-40011   ( 09957-04010 )

      Note


      • Be careful not to damage the front transfer case oil seal and front transfer case contact surface.

      • Apply grease to the tip of SST center bolt before use.

  5. INSTALL FRONT TRANSFER CASE OIL SEAL


    1. Apply transfer oil to the spline of the driven sprocket.

    2. A01X0PME01

      Using SST and a hammer, tap in a new front transfer case oil seal.

      SST
      09613-26010

      Note

      The front transfer case oil seal should be installed completely.

  6. INSTALL FRONT OUTPUT SHAFT COMPANION FLANGE SUB-ASSEMBLY

    Click here

  7. INSTALL FRONT PROPELLER SHAFT ASSEMBLY

    Click here

  8. ADD TRANSFER OIL

    Click here

  9. CHECK FOR TRANSFER OIL LEAK