OIL PUMP REASSEMBLY

PROCEDURE


  1. INSTALL MANUAL TRANSMISSION OIL PUMP COVER O-RING


    1. Install a new O-ring to the oil pump relief valve seat.

  2. INSTALL OIL PUMP RELIEF VALVE SEAT

    A01X8OJ

    1. Coat the oil pump relief valve seat with gear oil.

    2. Install the relief valve seat into the oil pump cover.

  3. INSTALL TRANSMISSION OIL PUMP COVER BALL

    A01X2GH

    1. Install the ball into the oil pump cover.

  4. INSTALL TRANSMISSION OIL PUMP COVER COMPRESSION SPRING

    A01X1GP

    1. Install the compression spring into the oil pump cover.

  5. INSTALL NO. 1 MANUAL TRANSMISSION OIL PUMP COVER PLUG

    A01X2YA

    1. Using a hexagon wrench, install the oil pump cover plug.

      Torque:
      18 N*m  { 185 kgf*cm, 13 ft.*lbf }

  6. INSTALL MANUAL TRANSMISSION OIL PUMP DRIVEN ROTOR

    A01X9H4

    1. Coat the oil pump driven rotor with gear oil.

    2. Install the oil pump driven rotor into the oil pump cover.

  7. INSTALL MANUAL TRANSMISSION OIL PUMP DRIVE ROTOR

    A01X8AL

    1. Coat the oil pump drive rotor with gear oil.

    2. Install the oil pump drive rotor into the oil pump cover.

  8. INSTALL TRANSMISSION OIL PUMP COVER OIL SEAL

    B0010ZWE03
    *1 Dimension A

    1. Using SST and a hammer, tap a new oil seal into the oil pump cover in accordance with the dimension specified in the illustration.

      SST
      09950-70010   ( 09951-07150 )
      09950-60010   ( 09951-00640 )
      Dimension A
      35.3 to 35.9 mm (1.39 to 1.41 in.)