MANUAL TRANSMISSION OIL REPLACEMENT

PROCEDURE

1. Click here

   DRAIN MANUAL TRANSMISSION OIL

   
   

   1. Remove the drain plug and gasket and then drain the manual transmission oil.

   2. 

      Remove the filler plug and gasket.

   3. Install a new gasket and the drain plug.

      37 N*m

      380 kgf*cm

      27 ft.*lbf

2. Click here

   ADD MANUAL TRANSMISSION OIL

3. Click here

   INSPECT TRANSMISSION OIL

   
   

   1. Park the vehicle in a level place.

   2. 

      Table 1.

      *1	0 to 5 mm
      *2	(0 to 0.196 in.)

      Check that the oil level is within 5 mm (0.196 in.) of the lowest point of the transmission filler plug opening.

      Note:
      

      • Problems may occur when the oil level is too high or low.

      • After replacing the oil, drive the vehicle and check the oil level again.

   3. Inspect for oil leaks when the oil level is low.

   4. 

      Install a new gasket and the filler plug.

      37 N*m

      380 kgf*cm

      27 ft.*lbf