CLUTCH ACCUMULATOR INSTALLATION

PROCEDURE


  1. INSTALL CLUTCH ACCUMULATOR ASSEMBLY

    A01XAUO

    1. Install the clutch accumulator with the 3 bolts.

      Torque:
      12 N*m  { 120 kgf*cm, 9 ft.*lbf }
    2. A01X069

      Using a union nut wrench, connect the flexible hose tube.

      Torque:
      15 N*m  { 155 kgf*cm, 11 ft.*lbf }

      Note

      Use the formula to calculate special torque values for situations where a union nut wrench is combined with a torque wrench Click here.

  2. INSTALL CLUTCH RELEASE CYLINDER TO ACCUMULATOR TUBE

    Click here

  3. INSTALL NO. 1 CLUTCH HOUSING COVER

    Click here

  4. FILL RESERVOIR WITH BRAKE FLUID

    Click here

  5. BLEED CLUTCH LINE

    Click here

  6. CHECK FLUID LEVEL IN RESERVOIR

    Click here

  7. INSPECT FOR CLUTCH FLUID LEAK